Grease Trap Repair in Aloha, OR

Dependable Grease Trap Repair Services in Aloha, OR

Damaged Baffle and Lid Repair in Aloha, OR

The internal baffles of a grease trap are crucial for separating FOG from wastewater. If these are damaged or dislodged, the trap becomes inefficient, allowing grease to escape into the sewer system. We repair or replace broken baffles and cracked lids in Aloha, OR, making sure your trap functions as designed. A secure lid also prevents odors and keeps pests out, maintaining hygiene around the unit.

Grease Trap Leak Repair in Aloha

Leaks can come from cracked trap bodies, failed gaskets or loose pipe connections. Indoor leaks can damage floors and create slip hazards in the kitchen. We locate the source and replace gaskets, seal fittings or repair cracks when possible. Outdoor leaks can contaminate soil and lead to odors around the building. If the body is badly damaged, we recommend replacement.

Hydro-Jetting for Grease Trap Repair in Aloha

When traditional snaking isn't enough, hydro-jetting is our go-to method for severe grease trap blockages. This powerful technique uses high-pressure water streams to fully scour the interior of pipes and the grease trap itself, removing years of FOG buildup, scale, and debris. It's a highly effective, non-invasive method that not only clears clogs but also cleans the lines, significantly reducing the likelihood of future blockages in your Aloha business.

Lid, Gasket and Riser Repair in Aloha, OR

Damaged lids and failed gaskets let odors escape and create safety hazards. Outdoor risers can crack from vehicle traffic or ground movement. We replace lids, install new gaskets and repair or replace risers. Traffic-rated lids are installed where trucks or cars drive over the interceptor. These repairs keep odors in and keep people safe.

Inlet and Outlet Tee Repair in Aloha, OR

Tees direct flow into and out of the trap at the correct depth. Missing or broken tees allow floating grease to escape into the sewer line. We replace damaged tees with durable PVC or other approved materials. We also check that they are set at the right depth for your unit. This is one of the most common and necessary grease trap repairs.

Clogged Grease Trap Repair in Aloha

Grease traps often clog due to excessive accumulation of fats, oils, and grease (FOGs) or food solids. Our technicians use high-pressure hydro-jetting to break down tough blockages and thoroughly clean the internal baffles and lines. We also inspect for underlying issues like damaged pipes or improper disposal practices that contribute to repeat clogs, offering solutions to prevent future blockages. Identifying the precise location and nature of the clog is key for effective repair and long-term performance in your Aloha establishment.

Grease Line Clog Repair in Aloha, OR

Grease that hardens in the lines before or after the trap can cause backups even when the trap itself is clean. We use hydro jetting to clear the pipe and remove buildup. A camera inspection helps us confirm the line is clear and check for damage. If we find broken or sagging pipe, we can repair the section. This keeps water and waste moving freely.

Commercial Grease Interceptor Repair in Aloha, OR

Larger commercial establishments often utilize grease interceptors, which are more substantial than standard grease traps. These systems require specialized knowledge for repair, often involving more complex piping and larger capacity tanks. Our technicians are trained in the repair of all types and sizes of commercial grease interceptors, making sure your high-volume kitchen in Aloha, OR remains compliant and functional, regardless of the system's complexity.